Asphalt Diamond Saw Cutting Blade

1. High efficiency and long lifespan
2. Competitive price and stable quality
3. Production capacity: 20,000 pieces/month
4. Various blade sizes and types available
5. Good cutting result: smooth cutting, flat surface and even size
Description

Asphalt Diamond Saw Cutting Blade


Experienced manufacturer of Asphalt Diamond Saw Cutting Blade, we supply diamond segments, diamond saw blades, diamond wire saw and diamond grinding tools for stone factories, quarries and wholesalers all over the world.

Application

For multi blade cutter, gang saw blade, bridge cutting machine, single arm cutting machine, manual handing machine, able cutting machine, etc.Designed for various hardness stone (soft, medium hard and very hard stones) cutting: granite, marble, sandstone, onyx, limestone, travertine, quartz stone, artificial stone, andesite, volcanic, lava stone, basalt, microcrystal stone, blue stone, dolomite and construction materials (concrete, tile, ceramic, asphalt, floor) to reduce segment cost and increase cutting efficiency.

Packaging and Shipping

Inner packing: a diamond saw blade is covered by antirust paint and plastic, then packed in a paper box; outside packaging is according to the transport way, if by air, we recommend carton package which will reduce the weight; if by sea, we recommend crate which is seaworthy. Other packaging is also available upon your request.
Urgent order with less weight or samples, courier service is recommended;
Normal (regular) order which weight over 45kgs, delivering by air is recommended;
Big diameter saw blades or heavy weight products, shipping by sea is recommended.
Edgestone will offer advices according to the actual order requirements.

Our Services

1. Fine raw materials are used for processing, high grade raw materials, imported cobalt powder and high-quality diamond single crystals, to ensure the best performance of our products.
2. Customized designs are available. We can also help customers design and develop new products, and adjust cutting efficiency and lifespan upon your request.
3. Knowledgeable sales representatives are available to reply all inquiries and e-mails within 24 hours.
4. Every details will be confirmed with you before production.
5. Each processing would be completed by our skillful worker.
6. Strict quality management system. During the whole production process, from raw material choosing, processing to packing, our quality assurance people will strictly control each single and every process to guarantee quality standards and punctual delivery.
7. Detailed and clear pictures will be sent before packing and loading for you.
8. We will keep you update of the order and shipping status till you get the products smoothly.

If you're interested in Asphalt Diamond Saw Cutting Blade, just feel free to contact us, we will keep providing excellent service and good quality products for you.



Contact Info.

Sales Manager: Adam Li
Email:
info@buydiamondtool.com
Phone/WhatsApp: 0086-15805032000
Skype: adam-li@outlook.com

It has been proved that the compressibility and the formability are opposite to each other, that is, the compressibility of the powder with good formability is poor. Therefore, in the industrial production, it is necessary to comprehensively compare compressibility and formability to obtain the best pressing performance. Third, the powder size and its determination  1. Particle size and particle size composition The size of powder particles is represented by the equivalent diameter of the particles, abbreviated as particle size or particle size, and the unit is n1m or μm. However, as a powder, the particles do not have the same particle size, but consist of particles with different particle sizes. Therefore, particles with different particle sizes account for the percentage of the total powder.  The amount indicates the particle size composition of the powder, ie, the particle size distribution. Industrial production of metal powders have a wide particle size range of approximately 0.15 μm. The production of metal powders for saw blades and drill bits has a much narrower particle size range, which is roughly 10,000 μm in diameter and more than 50% finer than 40 μm. Powder particle size and size distribution directly affect the process performance of the powder product, thus forming a powder of the sintering properties of the final product as well as a significant impact are thus selec.ted must meet process specifications. 2. Sieve analysis The principle of powder particle size determination is an important basis for powder quality in powder metallurgy production and adjustment and control of the process. With the development of industrial production, powders for various uses have been put into use one after another. The complexity of the powder shape and the application of ultra-fine powders have made powder measurement methods as many as several  Species. Sieve analysis is a commonly used method in diamond tools, which is suitable for the grading and sizing of medium and coarse powders of 40 μm or more. (1) Operation. Weigh a certain weight (50g or generally lOOg) powder, the powder passes through a set of screen (mesh number in ascending, descending mesh size), which is divided into several levels according to the particle size. The pore size of each powder is represented by the pore size of the corresponding sieve. As long as weighing the weight of each level of powder  The particle size composition of the powder in terms of percent by weight can be calculated. The standard sieves commonly used for sieve analysis consist of a set of 5 or 6 sieve trays with different mesh sizes, top cover and bottom plate. Accurately   Asphalt Diamond Saw Cutting Blade  The dried powder to be analyzed is put into the uppermost sieve, covered with a sieve lid, and placed on the sieve bottom, hand-rolled or on a special sieve machine. Sieve analysis test. Sieve shaker horizontal rotation frequency of about 290r / nrin, while a frequency of about 150 times per minute tap sieve trays, sieve trays both the rotary movement, again for about 3cn1 rpifj the vibrator, and vibration. After 15n1in sifting, the powder on the screens and chassis at all levels is weighed. Accuracy  The total amount of O. l g o powders must not be less than 99% of the original powder sample weight. Repeat the test 2 3 times, take the average of the results, you can calculate the particle size composition, less than 0.5% can be counted as traces. Sampling of powder samples, generally determined by the bulk density of the powder: 1. 5g/cm3  Above take 10 baits, below 1. 5g/cm3 take 50go In practical applications, sieve analysis of industrial powders is often used on the 80th, 100th, 150th, 200th, 250th, and 325th day sieves to form a set of standard sieves. The granularity of the powder at each stage is expressed as the number of interspersed two screens or the size of the mesh, for example, 100 days + 150 days, which means that 100 days and  The powder of the first-level size remaining on the 150-day screen. Table 7-4 shows an example of sieve composition size analysis of reduced iron powder. 

Review