Diamond Cutting Blade For Granite

1. High efficiency and long lifespan
2. Competitive price and stable quality
3. Production capacity: 20,000 pieces/month
4. Various blade sizes and types available
5. Good cutting result: smooth cutting, flat surface and even size
Description

Diamond Cutting Blade For Granite


Experienced manufacturer of Diamond Cutting Blade For Granite, we supply diamond segments, diamond saw blades, diamond wire saw and diamond grinding tools for stone factories, quarries and wholesalers all over the world.

Application

For multi blade cutter, gang saw blade, bridge cutting machine, single arm cutting machine, manual handing machine, able cutting machine, etc.Designed for various hardness stone (soft, medium hard and very hard stones) cutting: granite, marble, sandstone, onyx, limestone, travertine, quartz stone, artificial stone, andesite, volcanic, lava stone, basalt, microcrystal stone, blue stone, dolomite and construction materials (concrete, tile, ceramic, asphalt, floor) to reduce segment cost and increase cutting efficiency.

Packaging and Shipping

Inner packing: a diamond saw blade is covered by antirust paint and plastic, then packed in a paper box; outside packaging is according to the transport way, if by air, we recommend carton package which will reduce the weight; if by sea, we recommend crate which is seaworthy. Other packaging is also available upon your request.
Urgent order with less weight or samples, courier service is recommended;
Normal (regular) order which weight over 45kgs, delivering by air is recommended;
Big diameter saw blades or heavy weight products, shipping by sea is recommended.
Edgestone will offer advices according to the actual order requirements.

Our Services

1. Fine raw materials are used for processing, high grade raw materials, imported cobalt powder and high-quality diamond single crystals, to ensure the best performance of our products.
2. Customized designs are available. We can also help customers design and develop new products, and adjust cutting efficiency and lifespan upon your request.
3. Knowledgeable sales representatives are available to reply all inquiries and e-mails within 24 hours.
4. Every details will be confirmed with you before production.
5. Each processing would be completed by our skillful worker.
6. Strict quality management system. During the whole production process, from raw material choosing, processing to packing, our quality assurance people will strictly control each single and every process to guarantee quality standards and punctual delivery.
7. Detailed and clear pictures will be sent before packing and loading for you.
8. We will keep you update of the order and shipping status till you get the products smoothly.

If you're interested in Diamond Cutting Blade For Granite, just feel free to contact us, we will keep providing excellent service and good quality products for you.



Contact Info.

Sales Manager: Adam Li
Email:
info@buydiamondtool.com
Phone/WhatsApp: 0086-15805032000
Skype: adam-li@outlook.com

Table 7 -4 sieve fraction of reduced iron powder  Standard sieve Main Lord (g) Percentage (%) The Mesh sieve ruler, J- (mm) + 80 + O. 175 0. 5 0. 5 " 80 + 100 " 0. 175 + O. 147 5. 0 5. 0 100 + 150 - 0 . 147 + O. 104 17 .S 17. 5 - 150 + 200 - 0. 104 + O. 074 19.0 19. 0 - 200 + 250 - 0 . 074 + 0. 061 8. 0 8. 8 - 250 + 325 - 0. 061 + O. 043 20.0 20 . 0 - 325 - 0. 043 30.0 30.0    (2) Screen standard. At present, international standards are screened by Tyler, and our country's standards are similar to Tyler's. The mesh number refers to the number of meshes per inch of the screen. The general mesh number is marked on the screen frame, so it is commonly known as the screen number. The larger the mesh size, the finer the mesh. The number of meshes is actually related to the thickness of the wire mesh and the size of the mesh, and the number of mesh holes per 1 inch is consistent with the number of mesh wires.  If m represents the mesh number, α represents the mesh size (mm) and d represents the wire diameter C μm ), the following relational equations are available: m = 25. 4/( α + d ) ( 7 -2 ) Taylo.r's sieve indexing is based on a 200-mesh sieve size of 0.074 mm (this sieve is called a base sieve), multiplied by the main modulus fi = 1.414 to obtain a 150-mesh sieve size of 0. 104mm o and so on, multiplying by 0. 074mm by (fi ) 11 (n = 1,2, 3 , ...) to obtain mesh sizes of 150, 100, 65, 48, and 35 mesh, respectively. Divide (fi) by 0. 074nm1 (n bucket, 2, 3 , ...> , mesh holes smaller than 200 mesh 270 mesh and 400 mesh are obtained. Taylo.r's sieve also uses an auxiliary modulus; /f = 1.189, and uses it to multiply or divide by 0. 074n1m to obtain a mesh size of a finer series of meshes. Table 7-5 lists Tay.lor's standard sieves. Table 7 - 5 Ta.ylor Standard Screen  Numbers m mesh size α ( mm ) Wire diameter d ( mm)  Pound 1 mesh size 'α ( mm) Wire diameter d ( mm) 32 0. 495 0. 300 115 0. 124 0. 097 35 0. 417 0. 310 150 0. 104 0. 066 42 0. 351 0.254 170 0. 089 0. 061 48 0. 295 0.234 200 0. 074 0. 053 60 0. 246 0. 183 250 0.061 0. 041 65 0. 208. 178 270 0. 053 0. 041 80 0. 175 0. 142 325 0.043 0. 036 100 0. 147 0. 107 400 0. 038 0. 025   Diamond Cutting Blade For Granite  Fourth, the specific surface of the powder and its determination  The specific surface of the powder is the total surface area of ​​the powder, expressed as m2/g or cm2/g. The comprehensive nature of the specific surface of the powder is determined by the combination of the properties of the individual particles and the properties of the powder. Many physical and chemical properties of specific surface and powder, such as adsorption, dissolution rate, and burning  The knot activity is directly related to. The specific surface area of ​​the powder is usually measured by the adsorption method and the permeation method. The basic principle of gas adsorption method is: using the physical adsorption of gas on the solid surface, measuring the weight or volume of the monolayer adsorbed on the solid surface, and then calculating the total surface area of ​​the substance by the cross-sectional area of ​​the gas molecule, ie obtaining the ratio of surface. The principle of the transmission method is: the permeability or resistance of the fluid through the powder bed and the thickness or specific surface area of ​​the powder. About. The finer the powder, the larger the specific surface area and the greater the resistance to fluids, and the smaller the flow per unit area per unit time. In other words, when the porosity of the powder bed is constant, the flow rate of the fluid through the coarse powder is greater than the flow rate through the fine powder. Because the transmittance or flow rate is easy to measure  Therefore, as long as the quantitative relationship between them and the powder surface is found out, the specific surface of the powder can be known.   Section 2 Forming  Shaping is the process of densifying metal powder into a green body with a certain shape, size, porosity and strength. The powder metallurgy method is used to produce diamond tools, most of which are formed by molding methods, and the molds are metal or graphite molds.

Review