Diamond Floor Polishing Pads

1 High efficiency and long lifespan
2 Competitive price and stable quality
3 Production capacity: 60,000 pieces/month
4 Various polishing pad sizes, grits and types available
5 component: resin and diamond
6 Adapter: hook and loop

Diamond Floor Polishing Pads

Experienced manufacturer of Diamond Floor Polishing Pads, we supply diamond segments, diamond saw blades, diamond wire saw and diamond grinding tools for stone factories, quarries and wholesalers all over the world.


Dry and wet use, diamond polishing pads are backed with Velcro, can be mounted on a rigid backer pad to fit on angle grinder, floor polishing machine, other hand hold machine to polish, maintain, or restore for granite ,marble, sandstone, onyx, limestone, travertine, quartz stone, artificial stone, andesite, volcanic, lava stone, basalt, microcrystal stone, blue stone, dolomite and construction materials (concrete, tile, ceramic, asphalt, floor) to reduce cost and increase polishing efficiency.

Packaging and Shipping for Diamond Polishing Pad

The inner packaging is carton, outside packaging is according to the transport way, if by air, we recommend carton package which will reduce the weight; if by sea, we recommend crate which is seaworthy. Other packaging is also available upon your request.
Urgent order with less weight or samples, courier service is recommended;
Normal (regular) order which weight over 45kgs, delivering by air is recommended;
Big diameter saw blades or heavy weight products, shipping by sea is recommended.
Edgestone will offer advices according to the actual order requirements.

Our Services

1. Fine raw materials are used for processing, high grade raw materials, imported cobalt powder and high-quality diamond single crystals, to ensure the best performance of our products.
2. Customized designs are available. We can also help customers design and develop new products, and adjust cutting efficiency and lifespan upon your request.
3. Knowledgeable sales representatives are available to reply all inquiries and e-mails within 24 hours.
4. Every details will be confirmed with you before production.
5. Each processing would be completed by our skillful worker.
6. Strict quality management system. During the whole production process, from raw material choosing, processing to packing, our quality assurance people will strictly control each single and every process to guarantee quality standards and punctual delivery.
7. Detailed and clear pictures will be sent before packing and loading for you.
8. We will keep you update of the order and shipping status till you get the products smoothly.

If you're interested in Diamond Floor Polishing Pads, just feel free to contact us, we will keep providing excellent service and good quality products for you.

Contact Info.

Sales Manager: Adam Li
Phone/WhatsApp: 0086-15805032000
Skype: adam-li@outlook.com

and on the other hand, reasonable production quotas and material consumption quotas must also be established. Table 5 - 8 Classification of rock fissures and rock quality  Fissure level rock fissure degree K (block/m) r η(% 〉 W(pcs/rev) RQD indicator (%) rock mass Complete 1 5 70 100 < 0. 5 > 90 high quality formations II Weakly fissured 6 10 60 90 0. 5 l 75 90 Good formation Dishes Cracked 11 30 50 80 1.01 2. 0 50 75 General formations IV Strong fissured 31 50 40 70 2. 01 3. 0 25 50 Poor stratum v completely broken > 51 30 60 > 3. 01 < 25 poor formation     Four, drill size  (1) For the specifications of the drill bit of the geological system of the Ministry of Metallurgical Industry, see Appendix 1 and Appendix 2 and Figure 1 and Figure 2, and the corresponding size of the reamer shown in Appendix 3 and Figure 3. (2) Refer to Appendix 4 (a), 4 (b), 4 (c), and 4 (d) for the specifications of drill bit in the former Ministry of Geology and Mineral Resources. See Appendix 5 (a) and 5 (b) for the corresponding size of the reamer. ) and 5(c). (3) Using a thin-walled drill bit, the wall thickness is 2 3. 5mn1, and the diameter is determined according to the needs. The main diameter is commonly used, 2 t, 3 gas, and helium. It is not preferred that large diameter drill bits are used for drilling in oil and gas wells, and diameters vary from 6 '12 f'.  Section 2 Selection of Structural Parameters of Diamond Inserts  Table-embedded diamond coring bits are generally used in the V first-order hard to hard rock formations, which are divided into three categories: natural diamond table inserts, artificial poly table inserts and diamond composite table inserts.  First, natural diamond table bit  It is particularly suitable for carbonate rock formations such as limestone, dolomite, etc.    Economic effect. The drill consists of diamond, carcass, nozzle, sink and steel body, as shown in Figure 5-5.    The Court 5 -5 diamond bits 1. Diamond; 2. Carcass: 3. Steel body; 4. Nozzle; 5. Inside and outside sinks'; 6. Inside steel cone; 7. Connection thread   Lip bit shape The lip shape affects the load distribution, powder removal, cooling diamond effect, and bit manufacturing process. Ordinary single- and double-tube inlaid drills, generally using the standard lip surface, the radius of its circular arc R is equal to or slightly larger than the width of the lip b, see Figure 5-6 (b). Diamond Floor Polishing Pads. This kind of lip surface not only overcomes the shortcomings of the flat-bottom edge edge in Fig. 5-6 (a), but also overcomes the disadvantage of high stress concentration in the peak area of ​​the top edge of the arc-shaped lip surface in Fig. 5-6 (c).  Figure 5-6. Lip profile of single and double pipe bits  For rope cored diamond drill bits, stepped lip surfaces and tapered lip surfaces are generally used due to the wall thickness of the drill bit. See Figure 5 -7 0 Multi-stepped lip (3 steps to 7 steps) is the standard form of wire coring bit, multi-free-surface groove type, high drilling speed, and good bit stability. Cone lip The surface can be seen as a micro-stepped shape, which is better than the stepped lip surface. 2. Carcass performance The main requirements for the performance of the carcass in table bits are:    Figure 5 - 7 rope coring table with drill bit lip surface     (1) The diamond can be firmly embedded and firmly bonded to the drill body. (2) Has sufficient compressive and impact strength to adapt to the complex stress state of the hole bottom. (3) Has a certain degree of hardness and wear resistance so that it can be adapted to the rock. At present, WC is commonly used as a carcass skeleton at home and abroad, and copper-based alloys (Cu based, adding some metal elements such as To, Co, Mn, Zn, and Sn) are used as the binder, and these requirements can be satisfied after sintering. At the same time, HRC is used to indicate the indexes of carcass performance, and the carcass is divided into three grades according to HRC to apply different rock formations. See Table 5-9.  Table 5 - 9 Carcass Performance Indexes and Applicable Strata  Platform body grade HRC scope of application Soft Carcass 20 25 5 Grade 7 weakly abrasive rock Medium Carcass 30 35 8 Grade 9 Medium Abrasive Rock Hard Tire 40 45 8 Class 9 Strong abrasive, fissured rock