Diamond Polishing Pads For Glass Polishing

1 High efficiency and long lifespan
2 Competitive price and stable quality
3 Production capacity: 60,000 pieces/month
4 Various polishing pad sizes, grits and types available
5 component: resin and diamond
6 Adapter: hook and loop

Diamond Polishing Pads For Glass Polishing

Experienced manufacturer of Diamond Polishing Pads For Glass Polishing, we supply diamond segments, diamond saw blades, diamond wire saw and diamond grinding tools for stone factories, quarries and wholesalers all over the world.


Dry and wet use, diamond polishing pads are backed with Velcro, can be mounted on a rigid backer pad to fit on angle grinder, floor polishing machine, other hand hold machine to polish, maintain, or restore for granite ,marble, sandstone, onyx, limestone, travertine, quartz stone, artificial stone, andesite, volcanic, lava stone, basalt, microcrystal stone, blue stone, dolomite and construction materials (concrete, tile, ceramic, asphalt, floor) to reduce cost and increase polishing efficiency.

Packaging and Shipping for Diamond Polishing Pad

The inner packaging is carton, outside packaging is according to the transport way, if by air, we recommend carton package which will reduce the weight; if by sea, we recommend crate which is seaworthy. Other packaging is also available upon your request.
Urgent order with less weight or samples, courier service is recommended;
Normal (regular) order which weight over 45kgs, delivering by air is recommended;
Big diameter saw blades or heavy weight products, shipping by sea is recommended.
Edgestone will offer advices according to the actual order requirements.

Our Services

1. Fine raw materials are used for processing, high grade raw materials, imported cobalt powder and high-quality diamond single crystals, to ensure the best performance of our products.
2. Customized designs are available. We can also help customers design and develop new products, and adjust cutting efficiency and lifespan upon your request.
3. Knowledgeable sales representatives are available to reply all inquiries and e-mails within 24 hours.
4. Every details will be confirmed with you before production.
5. Each processing would be completed by our skillful worker.
6. Strict quality management system. During the whole production process, from raw material choosing, processing to packing, our quality assurance people will strictly control each single and every process to guarantee quality standards and punctual delivery.
7. Detailed and clear pictures will be sent before packing and loading for you.
8. We will keep you update of the order and shipping status till you get the products smoothly.

If you're interested in Diamond Polishing Pads For Glass Polishing, just feel free to contact us, we will keep providing excellent service and good quality products for you.

Contact Info.

Sales Manager: Adam Li
Phone/WhatsApp: 0086-15805032000
Skype: adam-li@outlook.com

Diameter gauge materials include chip-like hard alloys, artificial polymers, natural diamonds, and composite sheets. The gauge material is usually placed in the non-working layer, and the inner and outer gauge materials cannot be placed on the same radial direction line to avoid tension cracks. See Figure 5-32.       the amount    Seven, water system  1. The hydraulic parameters of the drill In the diamond waterway design, several hydraulic parameters are involved.    C l ) Bit water power (hy also ?o - po, ver of hit). When the drill bit drills in the bottom of the hole, a given volume of flushing fluid flows through the surface of the drill bit (including the water outlet and the diffuse flow zone), resulting in a corresponding pressure drop of the drill bit, which consumes a certain amount of energy of the flushing liquid. This liquid energy is called water power. . It should satisfy: The rapid removal of the cuttings below the drill bit allows the bit body and diamond to be cooled and lubricated. Water power is calculated as follows: Pb = tiPb ? Q ? 103 (5 - 28) Where: Pb one bit water power, kW; tiPl, one bit pressure drop, MPa : Q-one flushing fluid flow, Us. The value of the water power directly influences the effect of powder discharge and cooling. For this purpose, a sufficiently high water power must be passed through the drill bit and be reasonably distributed over the surface of the drill head. (2) Unit water power. In the process of calculating the water power, the unit water power is usually used, that is, the water power per projected area of ​​the drill bit: Pb., =Pb!S ( 5 -29 ) Where: Pb., one unit of water power, kW/cm2; Pb total water power, kW; S - The projection area of ​​the bottom lip of the drill bit, Cn12. In oil drilling, the mechanical drilling rate was 2. 5 3m/h in soft ground, and the recommended unit water power was 0. 29 0. 34 kW/cm2: Diamond Polishing Pads For Glass Polishing. For harder formations with penetration rates below 1. 5 2. 5m/h, the unit water power is recommended to be 0. 17 0. 29kW/cm 2 , which is due to the cooling and lubrication of diamond in the hard formation compared to the carrier rock. The swarf is more important; accordingly, the unit water power in the medium hard formation 0 17 0. 29 kW/cm2 can be used. Compared with oil drilling, geologic drilling has a low pressure and a low flow rate. The pressure drop at the bottom of the drill bit is small, which is generally 0. 05 0. 2MPa (measured by the test bed), so the unit water power is low. The recommended unit water power in soft formation is 11.4 45 . 6W/cm2, 0. 34 0. 11W/cm2 is recommended in medium hard and hard formations. If the water power in the waterway is insufficient, it will cause the rock powder to stagnate at the bottom of the hole, forcing the bit to repeatedly crush the rock powder and reduce the drilling efficiency. In addition, the lack of water power will also result in poor cooling of the bit body and diamond, lighter formation of micro-firing, and severe fire drill accidents. If the water power is greater than the need for normal working of the drill bit, the following adverse effects will occur: 1) increase fluid erosion of the bit body and steel body; 2) generate lift for the drill bit; 3) increase fluid flow to the core. (3) Bit pressure drop. The bit pressure drop is the flow pressure loss caused by the frictional force between the working surface of the drill bit and the formation when the rinsing fluid flows through the drill bit, and the pressure loss caused by the direction change of the water line at the bottom of the drill bit, which is generally called the bit pressure drop. The test method is to lift the drill bit from the bottom of the hole first, then press the bit to the bottom of the well under the same flow, and the difference between the water pump pressure gauge is the pressure drop of the drill bit.  Geological drill bit can ignore the pressure loss along the way due to the relatively waterway, so the bit pressure drop is the local head loss caused by the bit tank and the nozzle.