English

Diamond Saw Blade For Cutting Granite

1. High efficiency and long lifespan
2. Competitive price and stable quality
3. Production capacity: 20,000 pieces/month
4. Various blade sizes and types available
5. Good cutting result: smooth cutting, flat surface and even size
Description

Diamond Saw Blade For Cutting Granite


Experienced manufacturer of Diamond Saw Blade For Cutting Granite, we supply diamond segments, diamond saw blades, diamond wire saw and diamond grinding tools for stone factories, quarries and wholesalers all over the world.

Application

For multi blade cutter, gang saw blade, bridge cutting machine, single arm cutting machine, manual handing machine, able cutting machine, etc.Designed for various hardness stone (soft, medium hard and very hard stones) cutting: granite, marble, sandstone, onyx, limestone, travertine, quartz stone, artificial stone, andesite, volcanic, lava stone, basalt, microcrystal stone, blue stone, dolomite and construction materials (concrete, tile, ceramic, asphalt, floor) to reduce segment cost and increase cutting efficiency.

Packaging and Shipping

Inner packing: a diamond saw blade is covered by antirust paint and plastic, then packed in a paper box; outside packaging is according to the transport way, if by air, we recommend carton package which will reduce the weight; if by sea, we recommend crate which is seaworthy. Other packaging is also available upon your request.
Urgent order with less weight or samples, courier service is recommended;
Normal (regular) order which weight over 45kgs, delivering by air is recommended;
Big diameter saw blades or heavy weight products, shipping by sea is recommended.
Edgestone will offer advices according to the actual order requirements.

Our Services

1. Fine raw materials are used for processing, high grade raw materials, imported cobalt powder and high-quality diamond single crystals, to ensure the best performance of our products.
2. Customized designs are available. We can also help customers design and develop new products, and adjust cutting efficiency and lifespan upon your request.
3. Knowledgeable sales representatives are available to reply all inquiries and e-mails within 24 hours.
4. Every details will be confirmed with you before production.
5. Each processing would be completed by our skillful worker.
6. Strict quality management system. During the whole production process, from raw material choosing, processing to packing, our quality assurance people will strictly control each single and every process to guarantee quality standards and punctual delivery.
7. Detailed and clear pictures will be sent before packing and loading for you.
8. We will keep you update of the order and shipping status till you get the products smoothly.

If you're interested in Diamond Saw Blade For Cutting Granite, just feel free to contact us, we will keep providing excellent service and good quality products for you.



Contact Info.

Sales Manager: Adam Li
Email:
info@buydiamondtool.com
Phone/WhatsApp: 0086-15805032000
Skype: adam-li@outlook.com

The microhardness of the powder particles is measured by using an ordinary microhardness tester and measuring the diagonal diagonal of the diamond pyramid indenter. The sample is first mixed with bakelite powder or organic resin powder, made into a billet at a pressure of 100 200MPa, and then cured by heating to 140°C. Pressed blank  Preparation of powder metallographic samples After grinding and polishing, microhardness was measured under a load of 20 30g. The microhardness of the particles depends to a large extent on the content of various impurities and alloy components in the powder and the number of character defects, and thus represents the plasticity of the powder. Microscopic Microscopy  The hardness differs depending on the production method, and the purity differs depending on the microhardness value. 3. Process performance of powder The process properties of the powder include bulk density, tap density, flowability, compressibility, and formability. The process performance mainly depends on the powder production process and powder treatment process (ball milling, annealing, lubricant addition, granulation, etc.). (1) Bulk density and tap density. In the powder press forming operation, the volume loading method is often used, that is, the amount of powder filled with a certain volume cavity is used to control the density and unit weight of the pressed parts. This requires that the powder filled with the mold cavity each time should be strictly not Change the weight. In fact, the weight of different powders filled with a certain volume is different  Therefore, it must be specified that bulk density or tap density should be used to describe this volumetric property of the powder. The bulk density refers to the mass of powder in unit volume when the powder sample is naturally filled with the specified volume, and the unit is in/cm3. The bulk density measuring device is shown in Figure 7-3 and Figure 7-4.  Figure 7-3      One of the bulk density measuring devices      When measuring the bulk density, the dry powder is filled in the measuring cup through the funnel hole and weighed after scraping to obtain the bulk density. For powders with good flowability such as reduced and atomized iron powder, the diameter of the funnel hole is 1/lOin (1in = 2.54cm), high l/8in; For the powders with poor flowability, the diameter of the funnel hole is l/5in, the height is l/8in, and the other dimensions are the same. The tap density is the density measured after the powder fills the specified volume under vibration or percussion. It is higher than the bulk density. 20% 50%.         The bulk density is the vain bulk density of the powder, and therefore its size is related to the station attachment force of the powder, the relative sliding resistance, and the degree to which the pores of the powder are filled with small particles. The bulk density is far from the density of the powder material, which means that there is a large amount of pores in the powder body.  The volume occupied is the pore volume. The ratio of the pore volume to the apparent volume of the powder body is called porosity. Porosity is a comprehensive indicator related to particle shape and density, surface state, powder particle size, and particle size composition. Table 7-3 lists the three types with the same granularity and granularity.  Copper powder, due to its different shapes, has a great difference in density and porosity when loosened. In general, the minimu.m porosity of the spherical powder is 50%, and the porosity of the flake powder can reach 90%: the reduction or electrolytic powder between the two. The porosity is 65% 75%.      Figure 7-4 Bulk density measuring device II I. funnel; 2. damping box; 3. damping diaphragm: 4. The main cup; 5 . Bracket   Diamond Saw Blade For Cutting Granite  Table 7-3 Density of Copper Powder with Different Particle Shapes  Particles j Sag Bulk density (glm3) Bulk density Cg/cm3) Porosity when loose (%) Sheet 0. 4 0. 70 95. 5 Irregular shapes 2. 3 3. 14 74. 2 Globular 4. 5 5. 30 49. 4  

Review