Diamond Saw Blade For Cutting Marble

1. High efficiency and long lifespan
2. Competitive price and stable quality
3. Production capacity: 20,000 pieces/month
4. Various blade sizes and types available
5. Good cutting result: smooth cutting, flat surface and even size

Diamond Saw Blade For Cutting Marble

Experienced manufacturer of Diamond Saw Blade For Cutting Marble, we supply diamond segments, diamond saw blades, diamond wire saw and diamond grinding tools for stone factories, quarries and wholesalers all over the world.


For multi blade cutter, gang saw blade, bridge cutting machine, single arm cutting machine, manual handing machine, able cutting machine, etc.Designed for various hardness stone (soft, medium hard and very hard stones) cutting: granite, marble, sandstone, onyx, limestone, travertine, quartz stone, artificial stone, andesite, volcanic, lava stone, basalt, microcrystal stone, blue stone, dolomite and construction materials (concrete, tile, ceramic, asphalt, floor) to reduce segment cost and increase cutting efficiency.

Packaging and Shipping

Inner packing: a diamond saw blade is covered by antirust paint and plastic, then packed in a paper box; outside packaging is according to the transport way, if by air, we recommend carton package which will reduce the weight; if by sea, we recommend crate which is seaworthy. Other packaging is also available upon your request.
Urgent order with less weight or samples, courier service is recommended;
Normal (regular) order which weight over 45kgs, delivering by air is recommended;
Big diameter saw blades or heavy weight products, shipping by sea is recommended.
Edgestone will offer advices according to the actual order requirements.

Our Services

1. Fine raw materials are used for processing, high grade raw materials, imported cobalt powder and high-quality diamond single crystals, to ensure the best performance of our products.
2. Customized designs are available. We can also help customers design and develop new products, and adjust cutting efficiency and lifespan upon your request.
3. Knowledgeable sales representatives are available to reply all inquiries and e-mails within 24 hours.
4. Every details will be confirmed with you before production.
5. Each processing would be completed by our skillful worker.
6. Strict quality management system. During the whole production process, from raw material choosing, processing to packing, our quality assurance people will strictly control each single and every process to guarantee quality standards and punctual delivery.
7. Detailed and clear pictures will be sent before packing and loading for you.
8. We will keep you update of the order and shipping status till you get the products smoothly.

If you're interested in Diamond Saw Blade For Cutting Marble, just feel free to contact us, we will keep providing excellent service and good quality products for you.

Contact Info.

Sales Manager: Adam Li
Phone/WhatsApp: 0086-15805032000
Skype: adam-li@outlook.com

The inner surface of the porous particles is often several orders of magnitude larger than the outer surface. The flour's well-developed surface area stores high surface energy for gases, liquids or  The particles exhibit a strong adsorption capacity, so that the ultrafine powder easily aggregates spontaneously into secondary particles and is easily oxidized or spontaneously ignited in the air. The metal powder is exposed to the atmosphere for a long time and interacts with oxygen or water vapor to form an oxide film on the surface, together with adsorbed water (N2, C02).  The surface coverage of the particles can reach several hundred atomic thicknesses. The specific surface area of ​​ultra-fine aluminum powder (particle size 20 60nm) is as high as 70m2/g, and its oxide layer can be It is 16% of the weight of 18%. 2. Chemical composition and physical properties of powder The powder is a disperse system composed of particles and particles. Therefore, when studying powder breaks, all properties such as pores belonging to single particles, powders, and powders should be studied separately. However, for diamond tools, only the chemical composition, physical properties and process properties of the powder are usually required.  Division and determination. (1) Chemical composition. Powder chemical composition includes the content of major metals and the content of impurities. Impurities mainly refer to: 1 Metals or non-metal components that combine with the main metal to form solid solutions or compounds, such as Si, Mn, C, S, P, 0, etc. in the reduced iron powder: 2 Brought into the raw material and powder production process Miscellaneous machinery  Quality, such as Si02, Al2 03, and insolubles such as refractory metals or carbides; 3 Absorption of oxygen, moisture, and other gases on the surface of the powder (Tuo, C02). (2) Physical properties. Physical properties include particle shape and structure, particle size and particle size composition, specific surface area, particle density, and particle hardness.     Others such as optical and electrical properties, magnetics, semi-conducting properties, melting points, and specific heat are all not significantly different from dense materials. Explained. 1) Particle shape. The particle shape of the powder is mainly determined by the production method of the powder, but also related to the crystallization of the material molecule or atom physiology. Generally, it can be divided into two major categories: regular shape and irregular shape, such as 7 - 2 As shown. The relationship between particle shape and powder production method is listed in  Table 7-2. Use optical microscopes, electron transmission microscopes, or scanning electron microscopes to study and observe particle shape and surface structure. Pavilion 7 -2 Shape of Powder Particles    Table 7-2 Relationship between particle shape and powder production method  Particle shape powder production method Spherical vapor deposition, liquid deposition Near spherical gas atomization, replacement (solutions) Sheet metal mechanical grinding Polygonal mechanical shatter Dendritic aqueous solution electrolysis Porous sponge-like metal oxide reduction Butterfly Metal Vortex Grinding Irregular water atomization, mechanical crushing, chemical precipitation  Diamond Saw Blade For Cutting Marble  2) Particle density. The theoretical density of a powdered material does not usually represent the actual density of the powdered particles, because the particles are always porous. The following three particle densities must be distinguished: 1 true density. Actually the true density of the powder material can be found by looking up the table. 2 like density. Also known as pycnometric density, is the particle mass divided by the size of the particles including closed cells. 3 effective density. That is, the density value obtained by dividing the particle mass by the volume of the particles including the open and closed pores is smaller than the above two density values.    3) Microhardness.