English

Diamond Wire Saw Beads

1. High efficiency and long lifespan
2. Competitive price and stable quality
3. Production capacity: 60,000 meters/month
4. Various wire saw types and sizes available
5. Good cutting result: smooth cutting, flat surface and even size
Description

Diamond Wire Saw Beads


Experienced manufacturer of Diamond Wire Saw Beads, we supply diamond segments, diamond saw blades, diamond wire saw and diamond grinding tools for stone factories, quarries and wholesalers all over the world.

Application

1. Diamond Wire Saw For Quarry:
Rubber wire is recommended, it can protect the wire saw rope very well and increase the wire’s strength. Rubber possesses excellent characteristic of temperature resistance, and it can be used under situation of water deficient. Strong flexibility can also reduce the cut-in-one-side problem.
2. Diamond Wire Saw For Block Trimming:
Plastic wire is recommended, it can be used to trim marble, granite and other stones. It could cut the blocks accurately with small inter-space.
3. Diamond Wire Saw For Profiling :
Plastic wire is recommended for shaping operations, it could provides a huge range of possibilities. It makes smooth surface and accurate sizes with small inter-space. Stone columns and special shape stone material for building industry can be processed in a much more economic way.
4. Diamond Wire Saw For Reinforce Concrete Cutting:
Diameter 10.5/11.5mm Rubber and Spring wire is recommended. The wires are widely used in the reinforced concrete with more than 5% steel inside. It is used in the building constructions, cutting for houses, bridges, cement pipes and under water buildings.
5. Diamond Multi-Wire Saw For Slab Cutting:
Diamond multi-cutting wire saws are suitable for cutting different types of large granite slabs with excellent efficiency.

Packaging and Shipping for Diamond Wire Saw Rope

Inner packing: covered by plastic, then packed in a carton; outside packaging is according to the transport way, if by air, we recommend carton package which will reduce the weight; if by sea, we recommend crate which is seaworthy. Other packaging is also available upon your request.
Urgent order with less weight or samples, courier service is recommended;
Normal (regular) order which weight over 45kgs, delivering by air is recommended;
Big diameter saw blades or heavy weight products, shipping by sea is recommended.
Edgestone will offer advices according to the actual order requirements.

Our Services

1. Fine raw materials are used for processing, high grade raw materials, imported cobalt powder and high-quality diamond single crystals, to ensure the best performance of our products.
2. Customized designs are available. We can also help customers design and develop new products, and adjust cutting efficiency and lifespan upon your request.
3. Knowledgeable sales representatives are available to reply all inquiries and e-mails within 24 hours.
4. Every details will be confirmed with you before production.
5. Each processing would be completed by our skillful worker.
6. Strict quality management system. During the whole production process, from raw material choosing, processing to packing, our quality assurance people will strictly control each single and every process to guarantee quality standards and punctual delivery.
7. Detailed and clear pictures will be sent before packing and loading for you.
8. We will keep you update of the order and shipping status till you get the products smoothly.

If you're interested in Diamond Wire Saw Beads, just feel free to contact us, we will keep providing excellent service and good quality products for you.



Contact Info.

Sales Manager: Adam Li
Email:
info@buydiamondtool.com
Phone/WhatsApp: 0086-15805032000
Skype: adam-li@outlook.com

   As can be seen in Table 3-2, the strength of several coated abrasives increased by 12%, 49%, 55%, and 35' respectively before coating; wool. before The Soviet Union increased the strength of the ACO and ACP-type broken diamonds by about one-fold film processing, and increased the strength of natural diamond coatings by about 40%. Second, the basic principles of film  1. The wettability of a metal or alloy solution on a diamond surface In order to make the metal or alloy coated on the diamond surface, the liquid metal or alloy is required to have good wettability on the diamond surface, so that the metal or alloy can be evenly distributed on the diamond surface. Therefore, the wettability of the metal alloy solution with respect to the diamond solid phase is a necessary condition for the coating. When the liquid and solid phases are in contact, three conditions may occur: (1) The solid is completely wetted. As shown in Figure 3-6(a), water can completely wet mica. (2) The solid part is wetted. As shown in Figure 3-6(b), the water partially wets the glass. (3) Solids are not wetted at all. As shown in Figure 3-6 (c), water cannot be wetted with paraffin wax.  :1     The Figure 3-6 Three Conditions of Wetness g. Gas phase; 1. Liquid phase: s. l Straight | Phase: 8. Wetting angle (contact)  The wettability of the visible liquid relative to the solid depends on the affinity of the two. As described above, mica is called hydrophilic material and paraffin is called hydrophobic material. Diamond is a hydrophobic material, but it has good wettability for certain metals or alloys. The wetness angle is commonly used to measure the degree of wetting of a substance. To measure the value, the smaller the value of 0, the better the wettability. Why solids can be wetted can be explained by the second law of thermodynamics. The second law of thermodynamics: whether a process can be performed depends on the free energy change of the system. The process of reducing the free energy of the system can be carried out spontaneously. The more reduction of system free energy, the greater the tendency of the process to spontaneously proceed. Figure 3-7 shows the change in wettability before and after diamond coating. Vacuum melting method The vacuum melt immersion method is to vacuum the condition of the metal or alloy active on the abrasive particles to make it molten to infiltrate the surface of the abrasive particles and penetrate into the micropores and cracks of the crystal grains under the action of the capillary force.  Diamond Wire Saw Beads. A layer of metal or alloy compound film is formed on the surface of the abrasive particles. This method must choose a surfactant as the flux, and the flux can both improve the wetting conditions and at the same time be a reducing agent. Most fluxes are chlorides, which hydrol.yze to produce hydrochloric acid, as shown in Equation (3-27). High-melting organic fatty acids can also be used. ZnCl2 + H20 = Zn ( OH )Cl + HC1 ( 3 -27 )    Or ZnCl2 + H2 0 = Zn( OH )2 + 2HC1 ( 3 - 28 ) After coating the diamond surface with the Cu-Cr alloy by the above method, a mesophase interface is formed between the metal film and the diamond surface. The metal carbides in the interface are Cr3 C2, Cr7 C3 and Cr23 C6 with an interface thickness of 10 12 μm. 3 - 12. In the intermediate phase boundary, the content distribution of Cu and Cr is changed, as shown in Figure 3-13. It can be seen from the figure that near the surface of the diamond, the main metal component is the core, and the main metal component on the surface of the coating is Cu.    2. Vacuum mixing deposition reaction method The method is to mix the metal powder with diamond and heat it to a certain temperature to vaporize the metal (vaporization) and deposit it on the diamond. On the surface, a thin MeC-Me layer was formed on the two-phase interface with a coating thickness of 0.5 IO μm. The bond strength of the film and diamond reaches 90 170 MPa. (1) The main factors affecting the coating. 1) Vapor pressure of metal powders.

Review