Diamond Wire Saw For Stone Cutting

1. High efficiency and long lifespan
2. Competitive price and stable quality
3. Production capacity: 60,000 meters/month
4. Various wire saw types and sizes available
5. Good cutting result: smooth cutting, flat surface and even size

Diamond Wire Saw For Stone Cutting

Experienced manufacturer of Diamond Wire Saw For Stone Cutting, we supply diamond segments, diamond saw blades, diamond wire saw and diamond grinding tools for stone factories, quarries and wholesalers all over the world.


1. Diamond Wire Saw For Quarry:
Rubber wire is recommended, it can protect the wire saw rope very well and increase the wire’s strength. Rubber possesses excellent characteristic of temperature resistance, and it can be used under situation of water deficient. Strong flexibility can also reduce the cut-in-one-side problem.
2. Diamond Wire Saw For Block Trimming:
Plastic wire is recommended, it can be used to trim marble, granite and other stones. It could cut the blocks accurately with small inter-space.
3. Diamond Wire Saw For Profiling :
Plastic wire is recommended for shaping operations, it could provides a huge range of possibilities. It makes smooth surface and accurate sizes with small inter-space. Stone columns and special shape stone material for building industry can be processed in a much more economic way.
4. Diamond Wire Saw For Reinforce Concrete Cutting:
Diameter 10.5/11.5mm Rubber and Spring wire is recommended. The wires are widely used in the reinforced concrete with more than 5% steel inside. It is used in the building constructions, cutting for houses, bridges, cement pipes and under water buildings.
5. Diamond Multi-Wire Saw For Slab Cutting:
Diamond multi-cutting wire saws are suitable for cutting different types of large granite slabs with excellent efficiency.

Packaging and Shipping for Diamond Wire Saw Rope

Inner packing: covered by plastic, then packed in a carton; outside packaging is according to the transport way, if by air, we recommend carton package which will reduce the weight; if by sea, we recommend crate which is seaworthy. Other packaging is also available upon your request.
Urgent order with less weight or samples, courier service is recommended;
Normal (regular) order which weight over 45kgs, delivering by air is recommended;
Big diameter saw blades or heavy weight products, shipping by sea is recommended.
Edgestone will offer advices according to the actual order requirements.

Our Services

1. Fine raw materials are used for processing, high grade raw materials, imported cobalt powder and high-quality diamond single crystals, to ensure the best performance of our products.
2. Customized designs are available. We can also help customers design and develop new products, and adjust cutting efficiency and lifespan upon your request.
3. Knowledgeable sales representatives are available to reply all inquiries and e-mails within 24 hours.
4. Every details will be confirmed with you before production.
5. Each processing would be completed by our skillful worker.
6. Strict quality management system. During the whole production process, from raw material choosing, processing to packing, our quality assurance people will strictly control each single and every process to guarantee quality standards and punctual delivery.
7. Detailed and clear pictures will be sent before packing and loading for you.
8. We will keep you update of the order and shipping status till you get the products smoothly.

If you're interested in Diamond Wire Saw For Stone Cutting, just feel free to contact us, we will keep providing excellent service and good quality products for you.

Contact Info.

Sales Manager: Adam Li
Phone/WhatsApp: 0086-15805032000
Skype: adam-li@outlook.com

the lower the degree of change, The better the thermal stability, the worse the opposite. The research shows that: Compared with the powder technology, the same particle size of diamond, the former is on the order of magnitude Higher than the latter. The thermal stability of synthetic diamond is generally measured under a protective atmosphere, and the method of determination is basically the same as the method for measuring the thermal stability of natural diamond. In our country, the nitrogen decomposition gas is used as the protective atmosphere during the measurement. From 700°C to 1 300°C, the temperature is held at 100°C for half an hour. After cooling to room temperature, the single-particle compressive strength is measured. The better the thermal stability of synthetic diamond, the higher the heat-resistant temperature. When domestic diamonds were heated to 900°C, their strength decreased significantly. 7. Magnetic Because synthetic diamond contains "catalyst" alloy impurities, such as Ni, Co-. Fe, etc., it has electromagnetic properties. As the content of inclusions increases, the electromagnetic property increases, and its strength is also lower. Therefore, a magnetic separator should be used for magnetic separation. The magnetically selec.ted diamond can also be broken and shaped to remove impurities such as inclusions, which can be used as low-grade products. The current national standards for quality testing of synthetic diamonds mainly include: 1 grain size composition: 2 compressive strength: 3 bulk density: 4 impurity content: 5 impact toughness. In fact, the commonly used synthetic diamond quality inspection standards mainly include: 1 impact toughness (TI); 2 thermal impact toughness (TTI); 3 eccentricity (ECC); 4 crushing strength (CFS); ;6 diamond particles per carat (PCC). In fact, domestic is still the main single-particle compressive strength as the standard, and foreign countries will TI, TTI value as the most basic performance testing indicators. Therefore, the specific characterization of synthetic diamonds can be based on actual conditions.   Section 4 Diamond Sintered Body Diamond Wire Saw For Stone Cutting The diamond sintered body, commonly known as polycrystalline diamond, is a synthetic diamond product that has been developed in the experimental research of “big diamond”. There is also a natural diamond aggregate in nature that is black and formerly known as “Carbonado”, commonly known as black diamond. After research, this black diamond is composed of micron-sized single crystal diamond and trace impurities. This kind of diamond is very hard and its strength is very high, but it has no complete regular shape and transparent and vivid color, so it has no decorative value, but it has excellent industrial application as a geological drill. Diamond sintered bodies are divided into two major categories: Polycarbonate (PCD) and Diamond Composite (PDC). They are all secondary synthesized by fine-grained synthetic diamond in a static ultrahigh-pressure synthesis facility. Diamond sintered body, as a large series of diamond products, has a very broad prospect of development and a large market capacity, especially in the production of oil and gas well drill bits and engineering geological drill bit occupies an important position. First, polycrystalline diamond Polycr (single line Diamond, abbreviated as PCD) is made of a number of fine-grained single-items sintered at high temperatures and pressures. The synthetic diamond aggregates and composites are collectively referred to as sintering rests. The former has no substrate and the latter has a cemented carbide substrate. In the product     The grains are disorderly, their hardness and wear resistance are relatively close in all directions, and they have good fracture toughness. Therefore, they can be rooted. According to different conditions of use made into different shapes. Common shapes are triangles, cubes, cylinders, etc. The synthesis methods include direct polymerization and secondary polymerization, among which the secondary polymerization method is widely used both domestically and abroad.