Good Quality Arix Diamond Blade

1. High efficiency and long lifespan
2. Competitive price and stable quality
3. Production capacity: 20,000 pieces/month
4. Various blade sizes and types available
5. Good cutting result: smooth cutting, flat surface and even size
Description

Good Quality Arix Diamond Blade


Experienced manufacturer of Good Quality Arix Diamond Blade, we supply diamond segments, diamond saw blades, diamond wire saw and diamond grinding tools for stone factories, quarries and wholesalers all over the world.

Application

For multi blade cutter, gang saw blade, bridge cutting machine, single arm cutting machine, manual handing machine, able cutting machine, etc.Designed for various hardness stone (soft, medium hard and very hard stones) cutting: granite, marble, sandstone, onyx, limestone, travertine, quartz stone, artificial stone, andesite, volcanic, lava stone, basalt, microcrystal stone, blue stone, dolomite and construction materials (concrete, tile, ceramic, asphalt, floor) to reduce segment cost and increase cutting efficiency.

Packaging and Shipping

Inner packing: a diamond saw blade is covered by antirust paint and plastic, then packed in a paper box; outside packaging is according to the transport way, if by air, we recommend carton package which will reduce the weight; if by sea, we recommend crate which is seaworthy. Other packaging is also available upon your request.
Urgent order with less weight or samples, courier service is recommended;
Normal (regular) order which weight over 45kgs, delivering by air is recommended;
Big diameter saw blades or heavy weight products, shipping by sea is recommended.
Edgestone will offer advices according to the actual order requirements.

Our Services

1. Fine raw materials are used for processing, high grade raw materials, imported cobalt powder and high-quality diamond single crystals, to ensure the best performance of our products.
2. Customized designs are available. We can also help customers design and develop new products, and adjust cutting efficiency and lifespan upon your request.
3. Knowledgeable sales representatives are available to reply all inquiries and e-mails within 24 hours.
4. Every details will be confirmed with you before production.
5. Each processing would be completed by our skillful worker.
6. Strict quality management system. During the whole production process, from raw material choosing, processing to packing, our quality assurance people will strictly control each single and every process to guarantee quality standards and punctual delivery.
7. Detailed and clear pictures will be sent before packing and loading for you.
8. We will keep you update of the order and shipping status till you get the products smoothly.

If you're interested in Good Quality Arix Diamond Blade, just feel free to contact us, we will keep providing excellent service and good quality products for you.



Contact Info.

Sales Manager: Adam Li
Email:
info@buydiamondtool.com
Phone/WhatsApp: 0086-15805032000
Skype: adam-li@outlook.com

Such as iron powder, after the pressing pressure is eliminated, elastic expansion occurs, the green compact is elongated along the height, and the lateral pressure is reduced by about 35%. The plastic metal powder, the elastic expansion is very small, so the mold release pressure and friction loss are similar. The demolding pressure also increases with the billet height.  When the lubricant is used and the mold quality is good, the mold release pressure will be reduced  Figure 7-13 Relationship between demolding pressure and pressing pressure 1. No lubricant 2. Lubricated stearic acid   When the barium stearate is used as a lubricant to press the iron powder, the mold release pressure can be reduced to 0. 03P 0. 05P. 4 . Elastic aftereffect Elastic aftereffect refers to that when the pressing pressure is removed and the green compact is taken out of the die, due to the internal stress, the compact occurs elastic expansion.  The reason for the elastic aftereffect is that after the powder is pressed, the particles undergo elastic deformation, so that a large internal stress is accumulated inside the compact, which is an elastic internal stress, and the direction is opposite to the external force of the particles, trying to prevent the particles Deformation. When the pressure is relieved, the elastic internal stress relaxes.  In this way, the shape of the particles and the contact state between the particles are changed so that the powder compacts expand. As already mentioned, the compaction force is not the same in all directions, so the elastic internal stress is also anisotropic. The dimensional change of green compacts in the pressing direction can reach 5% 6%, perpendicular to the pressing side  The change in dimension is 1% 3%. Factors affecting the size of the elastic aftereffect include powder type, characteristics (powder size and particle size composition, particle shape, hardness, etc.), pressing pressure size and pressure rate, die material or structure, and lubricant. The elastic strain of the compact and stamper is one of the main causes of the cracking of the compact. Since the internal elasticity of the compact is not uniform after the elasticity, cracking occurs in the weak portion or the stress concentration portion during demolding.         Fourth, the distribution of green density Due to the loss of pressure transfer during pressing, the compact density is not uniform in height and cross section. Density has a direct relationship with hardness, and changes in hardness and density are similar. Experiments show that in the upper layer of the compaction in contact with the upper indenter, both density and hardness are Good Quality Arix Diamond Blade Gradually increasing from the center to the edge, that is, the top edge has the highest density and hardness. In the longitudinal direction of the compact, the compact density and hardness decrease along the height upwards and downwards. However, due to the effect of external friction, the axial pressure drop in the layer close to the mold wall is much larger than the center of the compact.  The density of the bottom edge of the compact is lower than the density of the center. That is, the distribution of the density and hardness of the bottom layer of the compact is opposite to that of the top layer. Figure 7-14 shows the distribution of powder compaction density.     The Figure 7 - 14 Distribution of density of powdered green compacts Pressure P 2 ? OO MPa ; cavity diameter D = 20rnm ; height to diameter ratio HI D = 0. 87   1. Factors affecting the density distribution of green compacts As mentioned before, the total pressure used in the pressing is the sum of the net pressure and the pressure loss. This pressure loss is the main cause of the uneven distribution of the density of the green compacts in the ordinary steel mold pressing process. Practice has proved that increasing the height of the green compact will increase the density difference of each part of the green compact, while increasing the diameter will make the density distribution of the green compact more uniform, that is, the greater the height-to-diameter ratio HID, the greater the difference in density.

Review