English

Nano Glass Cutting Diamond Blade

1. High efficiency and long lifespan
2. Competitive price and stable quality
3. Production capacity: 20,000 pieces/month
4. Various blade sizes and types available
5. Good cutting result: smooth cutting, flat surface and even size
Description

Nano Glass Cutting Diamond Blade


Experienced manufacturer of Nano Glass Cutting Diamond Blade, we supply diamond segments, diamond saw blades, diamond wire saw and diamond grinding tools for stone factories, quarries and wholesalers all over the world.

Application

For multi blade cutter, gang saw blade, bridge cutting machine, single arm cutting machine, manual handing machine, able cutting machine, etc.Designed for various hardness stone (soft, medium hard and very hard stones) cutting: granite, marble, sandstone, onyx, limestone, travertine, quartz stone, artificial stone, andesite, volcanic, lava stone, basalt, microcrystal stone, blue stone, dolomite and construction materials (concrete, tile, ceramic, asphalt, floor) to reduce segment cost and increase cutting efficiency.

Packaging and Shipping

Inner packing: a diamond saw blade is covered by antirust paint and plastic, then packed in a paper box; outside packaging is according to the transport way, if by air, we recommend carton package which will reduce the weight; if by sea, we recommend crate which is seaworthy. Other packaging is also available upon your request.
Urgent order with less weight or samples, courier service is recommended;
Normal (regular) order which weight over 45kgs, delivering by air is recommended;
Big diameter saw blades or heavy weight products, shipping by sea is recommended.
Edgestone will offer advices according to the actual order requirements.

Our Services

1. Fine raw materials are used for processing, high grade raw materials, imported cobalt powder and high-quality diamond single crystals, to ensure the best performance of our products.
2. Customized designs are available. We can also help customers design and develop new products, and adjust cutting efficiency and lifespan upon your request.
3. Knowledgeable sales representatives are available to reply all inquiries and e-mails within 24 hours.
4. Every details will be confirmed with you before production.
5. Each processing would be completed by our skillful worker.
6. Strict quality management system. During the whole production process, from raw material choosing, processing to packing, our quality assurance people will strictly control each single and every process to guarantee quality standards and punctual delivery.
7. Detailed and clear pictures will be sent before packing and loading for you.
8. We will keep you update of the order and shipping status till you get the products smoothly.

If you're interested in Nano Glass Cutting Diamond Blade, just feel free to contact us, we will keep providing excellent service and good quality products for you.



Contact Info.

Sales Manager: Adam Li
Email:
info@buydiamondtool.com
Phone/WhatsApp: 0086-15805032000
Skype: adam-li@outlook.com

Side pressure When the powder is compressed in the die, the compact will expand around to give a pressure on the die wall, so the die wall will give the compact a reaction force of equal size, that is, the die wall produced by the vertical compaction pressure Side pressure. The lateral pressure is always less than the vertical pressure, the reason is that between the powder particles  The internal friction and external friction between the powder and the die wall have lost part of the pressure. If the powder compaction process is simplified to have a transverse deformation within the elastic range, without considering the plastic deformation of the powder, nor considering the characteristics of the powder and the influence of the mold wall deformation, the following is derived between the side pressure and the vertical pressing pressure relationship: P., = tP = Master P ( 7 -5) L-v Where: P one vertical compression pressure, N: PS side pressure, N; v one note | loose ratio: 5 side pressure coefficient. It should be pointed out that formula (7 -5) is only an estimated value, which is not consistent with the actual situation. In addition, due to the influence of external friction, the lateral pressure changes with the height of the compact, that is, it gradually decreases with the decrease of the height. According to data, the iron powder compact specimen with a height of 7cm, in the one-way pressing, the lower layer side pressure is higher than the top layer lateral pressure. Small force 40% 50%. It is considered that the lateral pressure coefficient 5 and the Poisson's ratio v are related to the compact density. t = PS IP = t brush ? p (7 - 6) In the formula: 5 brush one by one to reach the theoretical density side pressure coefficient; P-one compact density, g/cm3. The experimental results for iron powder show that when the pressure is in the range of 160 400 MPa, there is a linear relationship between the lateral pressure and the pressing pressure: P = (0. 38 0. 41) P (7 -7) In fact, the change in lateral pressure during the pressing process is complicated. It has a direct impact on the quality of compacts, and it is difficult to determine them directly and accurately. When domestic and foreign powder metallurgy die design, generally take the side pressure coefficient t = 0. 25 or so. 2 mold wall friction Relevant data indicate that when other conditions are constant, the friction coefficient μ between the powder and the mold wall has the following relationship: In the low pressure region of less than 100 MPa, μ increases with the increase of compaction pressure: For plastic metal powder, above 100 200 MPa In the high pressure zone, μ does not change with the pressing pressure; Nano Glass Cutting Diamond Blade. For harder metal powders, the value of μ does not change with pressure when the pressure exceeds 200 300 MPa. small. Because the pressing pressure is the sum of the frictional net pressure and the pressure loss of the spent powder, the pressure loss of the large compaction is relatively reduced, and the total pressing pressure required is also reduced accordingly. Industrially, to reduce the pressure loss due to friction, the following measures can be taken: 1 Adding a lubricant (also called a release agent): 2 to improve the mold finish and hardness: 3 to improve the forming method, such as double-sided pressurization. 3. Mold release pressure The pressure required to remove the compact from the mold is called the release pressure. It is related to pressing pressure, powder properties, compact density and size, die, and lubricants. There is a linear relationship between demolding pressure and pressing pressure.    7 - 13 shows. Because after removing the pressing pressure, if the blank is not made Any change in life, then the pressure of the mold release should be equal to the loss of friction between the powder and the mold wall. The relationship between the release pressure of iron powder and pressing pressure P is 0. l3P, Cemented carbide material in most cases P off 0. 3P. The demoulding pressure is related to the following factors: after pressing pressure is eliminated, pressure The elastic expansion of the billet.

Review